Filter By:
- Bar Ends (12)
- BMX (74)
- Bottom Brackets (123)
- Brakes/Levers/Pads (423)
- Cables (154)
- Cassettes/Freewheels (81)
- Chainrings (142)
- Chains (99)
- Show More Categories
- Cranksets (243)
- Derailleurs (193)
- Forks (101)
- Groups (1)
- Handlebar Grips/Tape (297)
- Handlebars (230)
- Headsets (153)
- Pedals (200)
- Saddles/Pads (363)
- Seatposts (104)
- Shift/Brake Combinations (68)
- Shifters (101)
- Shocks (32)
- Stems (140)
- Other (753)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Prices
- Show Fewer Prices
- Show More Sizes
- Show Fewer Sizes
Parts

$10.60 - $42.00
- Hayes service parts for calipers
- Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

$420.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes.
- Full unidirectional carbon construction
- Mid-Reach Caliper rim brake compatible
- 35c max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12"
- No rider weight limit
- 5 year Whisky warranty
- Accommodates road plus tires
- Fender mounts

$140.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

$20.99
Jagwire's Elite Sealed Service Kits include 2 polymer-coated inner cables, 2 Speed-Lube liners, and 2 grub seals. Available for road and mountain, brake or shift, and SRAM/Shimano or Campagnolo.

$23.99
Jagwire's Elite Sealed Service Kits include 2 polymer-coated inner cables, 2 Speed-Lube liners, and 2 grub seals. Available for road and mountain, brake or shift, and SRAM/Shimano or Campagnolo.

$9.99
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.

$9.99
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

$49.99
Most of the Sunday team has been riding guard sprockets for a long time, so it was just a matter of time before they made their own. The Knox sprocket is made of 7075 aluminum and comes with a full guard on one side of the sprocket. It’s designed to fit larger chains like half-link chains so it’s compatible with any BMX drivetrain you have or want. It’s made super strong and will help protect your chain from being hit when slipping off a rail or messing up on a crankslide.
- Machined out of 7075 aluminum
- Full guard on one side of the sprocket
- Designed to fit larger chains like half-link chains
- 6mm thick

$54.99
Radio PRO Leon Hoppe's signature 47 Sprocket Guard is made to take a real beating. Featuring an integrated 8mm thick alloy guard and a robust CNC machined construction; if you're looking to get tech as hell and not break your chain, we suggest investing in one of these.

$30.99
The Radio Axis sprocket is CNC machined out of the highest quality 6061-T6 alloy and is 6.35mm thick to ensure that it can hold up to some real abuse. Ridden by most of our team, this amazing sprocket comes in 25t or 28t and is available in our wild Sandblasted Purple fade finish.
- Material: 6061-T6 alloy, full CNC machined
- Borehole: fits on to a 24mm spindle, comes with adaptors to fit 19mm and 22mm cranks.
- Thickness: 6.35mm
- Sizes: 25t or 28t
- Specials: strong 6.35mm thick full CNC alloy sprocket with x4 rotation holes, supplied with adaptors to fit any crank on the market
- Weight: 25t: 90g (3.20oz)

$64.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise.
FEATURES
- Six bolt clamping configuration
- Headset pre-load bolt recess (32mm diameter)
- 6061-T6 aluminum, CNC machined
SPECS
- 52mm reach
- 35mm rise
- 11 oz

$32.99
- For 19mm crank spindles and threaded Euro bottom bracket frames.
- High-quality four bearing design with aluminum cups.

$49.99
The Evo 2 brake is the industry leading U-brake because of its modular hardware features and affordable value. Install it as a rear brake or front brake straight out of the box. Comes with Odyssey’s convenient double lugged straddle cable, custom curved cable hanger and an array of hardware for adapting the brake to every possible set-up. Forged from aluminum for strength, and to avoid unnecessary upcharges from frivolous CNC machining.
The Evo 2 is the natural progression of the original Evolver. It has seen constant refinement and new running changes to keep it as the standard in BMX braking. This design allows for a seemingly limitless amount of cable installation options, while remaining equally powerful as both a front OR rear wheel brake. New forge tooling was created that provides for a sleeker side profile. Arms are forged prior to machining for strength and durability. Contrary to the uneducated in metallurgy, a forged metal piece is of much higher strength than a piece machined from a block of material.
FEATURES:
- All of the cable set screws are now flat-tipped to prevent excess damage to the cable’s inner wire
- Cable lugs are smaller and use a 10 mm hex head
- Pre-lugged straddle cable is shorter
- Front cable adapter is smaller and made of aluminum
- Flush surfaces, with the lowest possible overall stack height
- Front or rear wheel use
- Redesigned brake pads
- Two sets of springs (hard and soft for custom tension/modulation)
- Spring tension indicators (easy set up)
- Newly designed straddle hanger

$25.99
Chase Gouin’s signature tire. Predictable during tight turns and made to roll smooth at high speeds. Horizontal tread grooves provide shoe traction only when you need them to. This modern interpretation of one of the most popular tires ever made is used regularly by street riders too. Now available with a Special Compound tread durometer for polished indoor floors. 100 PSI, of course.

$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- Sold individually
- 14mm with 3/8” adapters only
- Replacement sleeves sold separately
- 4.5" (length) x 1.5" (outer diameter)
- 4.5 oz (9 oz for a pair)

$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately

$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.

$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.

$69.99
Introducing the Odyssey Highway Bar. It’s the biggest bar Odyssey makes and features a traditional 7/8” crossbar tubing for superior strength and durability on taller bars.
SPECS
- 9.5-inch rise
- 29” width
- 12° backsweep
- 1° upsweep
- Multi-Butted
- 41-Thermal® processed 4130 chromoly
- Weight 35 oz.

$33.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall.
Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too.
Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary.
By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain.
Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver.
- Width: 1/8-inch

$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths.
- 7075 Aluminum

$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz)

$12.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology.
- Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated.
- Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008.
- Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables.
- Gyro lug included at one end of the inner wire for use with detanglers.
- 60-65mm in length.

$24.99
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users.
- Right hand only (works flipped on the left)
- M2 specific upper cable and single cable coupler included.
Page 1 of 133
Next page