Accessories

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

No winter riding kit is complete without the proper headwear. The AmFIB® Lite Balaclava will help you conquer the cold with technical fabrics and thoughtful cycling features. Polartec® Wind Pro® fabric on the leading edge blocks the wind, while the highly breathable thermal fabric on the top and back keeps you from overheating. The hinged face covering is easy to pull down for eating and drinking, or to dump a little heat while climbing. It fits comfortably under a helmet and a ponytail port in the rear adds to the appeal of this full-featured balaclava. FEATURES: - Pedal to Zero™: Going by bike 5mi / 7km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Hinged face covering is easy to pull down when needed - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

This neck gaiter was made for the days when conditions call for upping the cozy factor. The drirelease Merino wool blend hits all the marks: insulating and breathable Merino gives this piece an cotton-soft feel while deftly pulling excess moisture away from the body, and woven-in synthetic fibers lend lasting stretchability and durability. Finished with reflective tape along the back seam, this small-but-mighty essential punches above its weight when the temps plummet. - 150g drirelease® Merino wool blend - Softer than cotton feel is great next to skin - Highly versatile winter staple - Made with recycled content - BioViz® powerful reflective elements that reach 100 meters for night visibility

When the trails are wet and sloppy, be prepared with the Proof 2.0 Winter Shoe Covers—designed to prevent cold air from seeping in while remaining flexible enough to allow your feet to move freely so you can focus on what's ahead. The water- and wind-resistant exterior of the Proof 2.0 winter shoe covers is optimized with flex zones in key areas and engineered from a super-stretch neoprene that minimizes bulky feel without compromising warmth. The sole includes a molded rubber bottom to help improve traction and durability when worn over bike shoes. Reflective detailing and locking zipper are the finishing details in this essential winter shoe cover. Fabric: - Water-resistant neoprene fabric with super-stretch neoprene flex zones at ankle and YKK locking zipper - 80% neoprene - 15% nylon - 5% rubber - Durable walking pads - Temperature rating of 20° – 45° F / -6° – 7° C

Knee warmers are an essential item for maximizing the usefulness of your existing wardrobe in chilly temperatures. When it's too cold for just a pair of shorts, pair these knee warmers with your favorite cycling shorts for a great, warm combination. - Flat-lock seams - Elastic cuff at top edge provides optimal fit and comfort - Elastic cuff at the bottom provides optimal fit and comfort - Reflective transfer print to mark right and left - Pre-shaped knees - Reflective logo on the back

- Wool-blend fine gauge knit - Double layer knit construction - Tonal jacquard knit design

A thoroughly modern take on a traditional-looking piece. We use a merino wool layer over a polyester jersey liner — the wool provides insulation and pulls the moisture away from the skin. The forehead and earflap are double layered for warmth, while the cap is thin enough to comfortably fit under your helmet. - Traditional style with technical construction - Merino wool/polyester mix outer layer with thin jersey liner over ears and forehead - Reinforced visor - Reflective detailing

- Thermoflex fleece fabric is warm, stretchy, and soft - Single-piece construction with flat-lock seams - Embossed Castelli wordmark logos - Dual-sided silicone gripper elastic at top prevents sliding down

- Thermoflex fleece fabric is warm, stretchy, and soft - Single-piece construction with flat-lock seams - Embossed Castelli wordmark logos - Dual-sided silicone gripper elastic at top prevents sliding down

- Thermoflex fleece fabric is warm, stretchy and soft - Single-piece construction with flat-lock seams - Embossed Castelli wordmark logos - Dual-sided silicone gripper elastic at top prevents sliding down

Draugenklaw Drop-Bar Pogies keep hands warm and dry and allow for full use of brake and integrated shift levers on cold commutes, training rides, race days, and touring in uncertain weather. Weather-resistant softshell fabric on the outside defends against wind and water. On the inside, soft fleece traps warmth for a cozy cockpit. Easy installation means you can put them on only when ride conditions call for it. Maximize comfort and minimize weight with Draugenklaw Drop-Bar Pogies. FEATURES - Far-infrared yarn collects body heat and holds warmth - Weather-resistant outer keeps moisture out - Lightweight design is ideal for race days and milder riding conditions - Compatible with flared drop bars - Reflective accents add visibility SIZE: One size fits most drop bars SUGGESTED TEMPERATURE RANGE: 15°F (-9°C) to 35°F (2°C)

- Matching with Beliv Kit. - Traditional four panel design. - Elastic band for a superb fit across a range of sizes. - 100% Cotton.

- Traditional four-panel design - Elastic band for a superb fit across a range of sizes - Fabric: 100% cotton

Liv's Mid-Thermal Knee Warmers are great for cool days and variable weather conditions. Made from fleece-lined ThermTextura fabric that protects you from the elements, these warmers also feature flatlock seams that provide amazing next-to-skin comfort. The race fit means they'll stay secure against your legs, and they have reflective accents for enhanced visibility. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

Liv's Midthermal Arm Warmers are great for cold rides, breezy descents, and unexpected weather. They're made from warm and soft brushed fabric that transfers moisture, breathes easily, and dries quickly. Reflective details at the wrist offer enhanced visibility when rides go long and the light starts to recede. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

Giant Caldo Arm Warmers feature a 3D ergonomic cut for great fit and comfort. Constructed from thermal ThermTextura fabric to regulate temperature and reflective accents for increased low-light visibility. - ThermTextura - 3D ergonomic cut - Reflective accents - UPF 50

Giant Caldo Knee Warmers feature a 3D ergonomic cut for great fit and comfort. Constructed from thermal ThermTextura fabric to regulate temperature and reflective accents for increased low-light visibility. - ThermTextura - 3D ergonomic cut - Reflective accents - UPF 50

Giant Caldo Leg Warmers feature a 3D ergonomic cut for great fit and comfort. Constructed from thermal ThermTextura fabric to regulate temperature and reflective accents for increased low-light visibility, with a 6-inch ankle zipper for easy on/off. - ThermTextura - 3D ergonomic cut - Reflective accents - UPF 50

For cold and blustery mornings with a chance of rain, Diversion Arm Warmers give you a lightweight, water repellent and wind resistant solution easily stashed in your jersey if things warm up. Constructed with an aerodynamic 3D ergonomic cut using water repellent and wind proof ProTextura 4-way stretch fabric, silicone gel grippers keep them secure while reflective detailing offers improved visibility in low light conditions. An essential for any cyclist's locker in changeable spring and autumn conditions, team them up with the Giant Diversion Short Sleeve Jersey for the ultimate cycling outer layer. Features - ProTextura fabric is waterproof, windproof and highly breathable in key exposure areas - ThermTextura fabric on the inside keeps you warm while wicking moisture to keep you dry - 3D ergonomic fit - Silicone gel gripper - Reflective accents

- ProTextura PLUS Wind and water proof material with critical seams taped - ThermTextura functionality due to the properties of neoprene - Medial locking side zipper with Velcro closure - Wear-proof bottom piece - Reflective details for additional visibility

ELEMENT PROTECTION. Soft and ultra-comfortable, the ProShield cap fits easily under your helmet, providing superior protection from the cold and rain. - ProTextura Plus technology features water-proof protection while maintaining high breathability (30000 g/m2/24hr JIS L1099 B1) - Reflective elements on trims enhance safety in low light or foggy conditions - Absorbent brow prevents sweat from dripping into eyes - Great fit and comfort - Fabric body: 100% polyester - Fabric inner: 92% polyester, 8% spandex